Door Trimmings - Part 4

The next seal to replace in my door sealing saga is the upper corner door seal.  This seal is located at the rear of the door just below the sash.  In my case I didn't have one to start with and installation wasn't quite intuitive, so I had to look this one up.  Essentially, this piece is glued into place with weatherstrip cement.  You'll need to pull the inner door card and the outer window seal to perform this job.

Start by gluing the rear part of the seal to the door.

Then, wrap the tab around the door and glue the tab to the upper part of the door.  When complete, the outer door seal will install over this tab.